Lexmark XC4342, User Manual

Page: 260 / 350

Error codes Error message Solution
31.64
Reinstall missing,
unplugged, or unresponsive
color imaging kit.
1
Open door B.
2
Remove the waste toner bottle.
Note: To avoid spilling the toner,
place the bottle in an upright
position.
3
Remove the cartridges.
4
Disconnect the imaging kit cable.
5
Remove the imaging kit.
6
Insert the imaging kit.
7
Connect the imaging kit cable.
8
Insert the cartridges.
9
Insert the waste toner bottle.
10
Close door B.
31.80
Reinstall missing or
unresponsive fuser.
1
Open door A, and then open
door A1.
2
Remove the fuser.
3
Insert the fuser.
4
Close door A1, and then close
door A.
32.40, 32.41, 32.42, 32.43
Replace unsupported [color]
cartridge.
See “Replacing a toner cartridge” on
page 204 .
32.60
Replace unsupported black
imaging unit.
See “Replacing the black imaging
unit” on page 207 .
32.64
Replace unsupported color
imaging kit.
See “Replacing the color imaging kit”
on page 216 .
33.40, 33.41, 33.42, 33.43
Non-Lexmark [color]
cartridge, see
User's Guide .
See “Non
‑
Lexmark supply” on
page 307 .
33.60
Non-Lexmark black imaging
unit, see
User's Guide .
33.64
Non-Lexmark color imaging
kit, see
User's Guide .
37.1
Insufficient memory to
collate job.
Try one or more of the following:
•
Touch Continue to print the part
of the job that is stored and to
begin collating the rest of the print
job.
•
Cancel the current print job.
37.3
Insufficient memory, some
held jobs were deleted.
Touch Continue to clear the message
and continue printing.
Troubleshoot a problem 260