Lexmark XC4342 User Manual Download

Page: 263 / 350

Error codes

Error message

Solution

71.12

Memory full, cannot print
faxes.

Touch

Print All

to print as many of the

faxes as have been saved.

71.13

Memory full. Cannot send
faxes.

Try one or more of the following:

•

Continue and try sending the fax
again.

•

Scan the original document one
page at a time, dial the fax
number, and then scan the
document.

72.01

E-mail SMTP server not set
up. Contact system
administrator.

Try either of the following:

•

Set up your e

‑

mail function. For

more information, see

•

Disable the error message. For
more information, see

“Disabling

the 'SMTP server not set up' error
message” on page 311

80.01, 80.09

Maintenance kit nearly low.

Touch

Continue

to clear the

message.

80.11, 80.19

Maintenance kit low.

Touch

Continue

to clear the

message.

80.21, 80.29

Maintenance kit very low.

Touch

Continue

to clear the

message.

80.31

Replace maintenance kit,
recommended life exceeded.

See

“Ordering a fuser maintenance

kit” on page 203

82.00, 82.02, 82.09

Waste toner bottle nearly
full.

Touch

Continue

to clear the

message.

82.12, 82.13, 82.19, 82.20, 82.22,
82.23, 82.29

Waste toner bottle almost
full.

Touch

Continue

to clear the

message.

82.30, 82.30, 82.33, 82.39, 82.40,
82.42, 82.49

Replace waste toner bottle.

See

“Replacing the waste toner

bottle” on page 225

84.01, 84.09

Black imaging unit or color
imaging kit nearly low.

Touch

Continue

to clear the

message.

84.11, 84.13, 84.19

Black imaging unit or color
imaging kit low.

Touch

Continue

to clear the

message.

84.21, 84.23, 84.29

Black imaging unit or color
imaging kit very low.

Touch

Continue

to clear the

message.

84.31, 84.33, 84.41, 84.43, 84.48

Replace black imaging unit
or color imaging kit.

•

See

“Replacing the black imaging

unit” on page 207

•

See

“Replacing the color imaging

kit” on page 216

Troubleshoot a problem

263

Summary of Contents for XC4342































































































































































































































































































































































Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands

Lexmark XC4342, User Manual

Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands