![background image](http://html1.mh-extra.com/html/kodak/ektascan-1120/ektascan-1120_service-manual_1984248194.webp)
SERVICE MANUAL
5–92
10FEB97 – SM3226-1
To Adjust:
[13] Enter [P] [M] [R].
[14] Enter a [-] pulse number to move the ROLLER
toward the STOPPER and a [+] pulse number to
move the roller away from the STOPPER.
[15] Enter [1] [0] for the speed.
Note
The STOPPER may need to be loosened to allow the ROLLER SHAFT to reach the correct position.
[16] Repeat Steps 13 - 15 until the ROLLER SHAFT lines up with the holes in the FRONT and REAR MECH
PLATES and contacts the TRANSPORT ROLLER.
[17] Loosen the 2 SCREWS.
[18] Move the STOPPER until it is against the ROLLER SHAFT.
[19] Tighten the 2 SCREWS.
[20] Go to Step 18 on Page 5–100 to check the RECEIVE ROLLER POSITION SENSOR.
error=0
Enter Command: PMR
Pulse number? (-30000 to 30000)[0]: -10
Speed? (10 to 1500 pps) [10]: 10
H129_5403BC
HOLE
SHAFT
ROLLER
STOPPER
SCREW (2)
H129_5403BCA