SERVICE MANUAL
4–8
10FEB97 – SM3226-1
[2] Check that the Calibration Image was used and not the Test Image.
Old-Type Calibration and Test Images
New-Type Calibration and Test Images
[3] If the Test Image was used, do the procedure Calibrating the Printer beginning on Page 4–4.
Important
The density of each step must be greater than or equal to the density of the previous step.
[4] Check that the DENSITOMETER is calibrated correctly.
[5] If calibration is still unsuccessful, call TAC.
H129_0101AA
CALIBRATION IMAGE
H129_0101ACD
H129_0100AA
TEST IMAGE
H129_0100ACA
CALIBRATION IMAGE
H129_0107AC
TEST IMAGE
H129_0108AC
