SERVICE MANUAL
5–100
10FEB97 – SM3226-1
[17] Check that the RECEIVE ROLLER is resting
against the STOP BRACKET.
Important
If the RECEIVE ROLLER is in position continue with
the next step. If the RECEIVE ROLLER is not in
position do the Receive Side Stopper Adjustment
procedure beginning at Step 13 on Page 5–92.
[18] Enter [P] [M] [R] to start the ROLLER MOTOR.
[19] Enter [5] [6] [2] for the pulse number.
[20] Enter [4] [4] [4] for the speed.
[21] Check that the LED INDICATOR on the
SENSOR is off.
Important
If the LED INDICATOR is on, go to Step 26.
[22] Enter [P] [M] [R] to start the ROLLER MOTOR.
[23] Enter [5] for the pulse number.
[24] Enter [1] [0] for the speed.
[25] Check to see that the LED INDICATOR on the
SENSOR is on. If it is on, STOP, this adjustment
is completed. If it is off, go to Step 30.
[26] Loosen the 2 SETSCREWS.
[27] Rotate the FLAG counterclockwise until the LED
INDICATOR on the SENSOR just turns off.
[28] Carefully tighten the 2 SETSCREWS.
[29] Go to Step 8 to repeat the check procedure.
[30] Loosen the 2 SETSCREWS.
[31] Rotate the FLAG clockwise until the LED
INDICATOR on the SENSOR just turns on.
[32] Carefully tighten the 2 SETSCREWS.
[33] Go to Step 8 to repeat the check procedure.
error=0
Enter Command: PMR
Pulse number? (-30000 to 30000)[0]: 562
Speed? (10 to 1500 pps) [10]: 444
error=0
Enter Command: PMR
Pulse number? (-30000 to 30000)[0]: 5
Speed? (10 to 1500 pps) [10]: 10
