Electrical Adjustments
SM3226-1 – 10FEB97
5–63
To Adjust:
[20] Rotate POTENTIOMETER VR4 on LASER DIODE CONTROL BOARD until the TP17 DC level is within
specification.
[21] For the STYLE -02/-03 BOARD, rotate POTENTIOMETER VRZ1, in the center of the PORCH BOARD, until
the TP18 peak level is within specification.
For the STYLE -07 BOARD, adjust the SWITCH DSW4 for a coarse adjustment until the TP18 peak level is
within specification. Adjust the SWITCH DSW5 for a fine adjustment
[22] Type LDF using the PORTABLE COMPUTER.
[23] Set the LASER DIODE CONTROL BOARD SWITCHES to the following:
[24] Press [ESC] as many times as needed to exit Diagnostics.
[25] Remove the OSCILLOSCOPE PROBES.
[26] Replace the LASER DIODE CONTROL BOARD COVER.
[27] Replace the TOP COVER.
STYLE -02/-03
STYLE -07
SW1: 1
SW2: 1
SW2: 1
SW3: 1
DSW1: F
DSW2: F
DSW3: F
