Kärcher MC 130, Manual

Page: 83 / 414

-
31
The front power lift (option) serves as a retainer for various
attachments with 3-point retainer.
To remove/attach a front power lift, a changing carriage is
required (optional accessory, order no. 2.852-067.0).

Place the vehicle on a level and solid surface to re-
move/attach the front power lift.
1 Lock lever
2 Retainer front power lift
3 Retaining frame vehicle

The locking lever on the vehicle must be in the un-
locked position (top lever position).

Position the front power lift centrally in front of the vehi-
cle using a pallet truck.

Insert the front power lift into the retaining frame of the
vehicle up to the stop.
1 Lock lever

Lock the front power lift (bottom lever position).
Important note
See chapter "Checking/adjusting attachment lock".

Lower the pallet truck and move it out.

Connect the hydraulic hoses with the relevant cou-
plings.
Note
Prior to attaching the hydraulic hoses, depressurise the
hydraulic system.
8.4 Front power lift (option)
8.4.1 Preparation
8.4.2 Attaching the front power lift to the
vehicle
83 EN