Kärcher MC 130, Manual

Page: 96 / 414

-
44
1 Waste container
2 Waste water sieve
3 Diffuser grid

Raise the emptied waste container.

Unlock the diffuser grille (4 retaining clips).

Clean waste container and cover by means of a water
jet.

Clean the area behind the waste water sieve by means
of a water jet.
1 Bayonet catch
2 Valve recycled water
3 Waste container

Raise the emptied waste container.

Open the bayonet catch.

Remove the valve and clean it under running water.
1 Side cover
2 Blower chamber

Unscrew 2 screws of the side cover.

Swivel out the side cover.

Clean the blower chamber by means of compressed air
or a moist cloth.
Clean soiled vacuum system (can be determined due to
vehicle vibrations caused by the suction blower running
out of true).
Empty waste container before cleaning the vacuum sys-
tem.

Start the motor.

Switch on PTO (on control panel of the arm rest).

Select engine speed 2200 rpm.

Switch on the suction blower.

With the water hose, spray fresh water in the suction
mouth area.
Note
The water collects in the water container of the waste
container. The cleaning process has been completed
successfully when clean water escapes from the diffus-
er.

Empty/tip out the water container.

Let the suction blower run to dry the container.
Note
Call Customer Service if, in spite of thorough cleaning, vi-
brations are still present (caused by the suction blower
running out of true).
11.5.4 Cleaning the waste container and cover
11.5.5 Cleaning recycled water valve
11.5.6 Cleaning the blower chamber
11.5.7 Cleaning the vacuum system
96 EN