Kärcher MC 130, Manual

Page: 70 / 414

-
18

DANGER
Risk of accident!

Do not adjust the steering wheel position while driving.
1 Lever, steering wheel inclination adjustment
2 Clamping lever, steering wheel height adjustment
3 Pedal brush contact pressure
For description, see Chapter "Pedals".
The inclination and height of the steering wheel can be ad-
justed.

Inclination adjustment : Operate the lever and incline
the steering wheel until the desired position is reached,
then release the lever.

Height adjustment : Open the clamping lever and ad-
just the steering wheel to the desired height, then close
the clamping lever again.

Danger
Risk of explosion!
– Do not refuel the machine in enclosed spaces.
– Smoking and open flames must be strictly avoided.
– Ensure that no fuel reaches the hot open surfaces.
1 Tank lid

Switch off engine.

Open fuel filler cap.

Fill in diesel.
Only use the fuels specified in the Operations Manual.

Insert the fuelling gun as deep as possible into the fuel
nozzle. Do not add any more fuel once the fuelling gun
stops according to the settings.

Wipe off any spilt fuel and close fuel filler cap.
–
Estimate the fuel requirement in order to avoid over-
flows.
1 Wiper fluid container
2 Cover
3 Fill level indicator hydraulic oil tank

Unlock the right motor cowling and remove with the at-
tachment frame being raised (see Chapter "Panels").

Remove the cover from the wiper fluid container.

Use a water and antifreeze mixture to refill.
Note
Please observe the information of the manufacturer!

Close the lid.

Reinstall the motor cowling.
1 Filling nozzle
2 Symbol for the "Fill" lever position
3 Symbol for the "Closed" lever position
4 Switch lever
5 Filling level indicator water tank

Unscrew the lid of the filler neck for fresh water.

Switch lever in the "Fill" position.

Attach the water supply hose to the filling nozzle and fill
the water tank.
NOTICE
Do not insert the water hose to fill the water tank (avoids
water getting sucked back in).

Shut off water supply.

Remove the water supply hose and close the filler neck
for fresh water.

Switch lever in the "Closed" position
6.4 Set the steering wheel position
6.5 Refuelling
6.5.1 Fuelling using a can
6.6 Filling the wiper fluid container
6.7 Fill water reservoir (for sweeper)
70 EN