JRC JMA-3400 Series Instruction Manual Download

Page: 173 / 314

Chapter 5 VARIOUS FUNCTIONS

125

5.33 FILE OPERATION

Marks, lines and own tracks stored in the equipment can be output via USB terminal.

Note:

Even if the display unit is power on with

the USB memory inserted in the USB port,

the USB memory is not recognized.

5.33.1 SAVE

Marks, lines and own tracks stored in the equipment can be output via USB terminal.

This operation can be worked while USB memory is inserted into the USB port on the front side.

Note:

The rear USB port is for mouse / trackball connection only.

5.33.2 LOAD

Load marks, lines and own tracks from USB.

Loading the data, stored data is overwritten.

5.33.3 DELETE

Delete marks, lines and own tracks via USB.

Press the MENU button.

Select “File Operation”.

Select each menu.

Save Load

Delete

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Search results

Summary of Contents for JMA-3400 Series

Reviews:

Related manuals for JMA-3400 Series

Brands by name

Popular brands

JRC JMA-3400 Series, Instruction Manual

Search results

Summary of Contents for JMA-3400 Series

Reviews:

Related manuals for JMA-3400 Series

Brands by name

Popular brands