manualshive.com logo in svg

JRC JMA-3400 Series, Instruction Manual, Page: 116 / 314

Share
Download
JRC JMA-3400 Series Instruction Manual Download Page 116

 

 

Chapter 5    VARIOUS FUNCTIONS 

68 

TT List operation 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 

Reference:

 

ڦ

TT List is displayed as follows. 

 
 
 
 

ڦ

The TT List can display information for the maximum number of tracking of the TT function. 

 

 

 

 

TT List 

CPA[NM] 

TCPA[min] 

BRG[

r

] RNG[NM] CRS[

r

] SPD[kn] 

No.01 1.12 

1 

275.3  1.26  180 

4.05 

Press 

Press 

Press 

Turn 

Turn 

Press 

A list of currently captured tracking target 
information is displayed. 

Turn the MULTI control and select TT.   
The # mark will be displayed on the TT and it will 
always be displayed. 

Select TT List Close and press the MULTI 
control to close the list. 
The information of the target with the # mark is 
displayed even if the list is closed 

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Reviews:

No comments