JRC JMA-3400 Series Instruction Manual Download Page 137

Page: 137 / 314

Chapter 5 VARIOUS FUNCTIONS

5.18 MARKER

Set operations for EBLs, parallel cursors, cursor mode and range rings.

Also set unit of VRMs.

5.18.1 EBL SETTING

Set operation for EBLs.

Set the mode to move starting point of EBL (“Floating”).

Floating

Off: Floating mode is disabled.

Screen FIX: Starting point of EBL is fixed on the radar display.

Lat/Lon Fix: Starting point of EBL is fixed at specific latitude and longitude.

Set the EBL bearing fix mode (“Bearing Mode”).

Bearing Mode

True: Numerical value of the EBL direction is fixed to the true direction based on

the north (0 °).

Relative: Fixe EBL bearing value to a relative bearing based on the heading of

own ship (0 °).

These settings can be set to each EBL.

Parallel cursor

䐡

Select each menu.

㻌

EBL Setting

䐟

Press the MENU button.

㻌

䐠

Select

“Marker.”

㻌

VRM Unit

Cursor Mode

Range Ring

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Search results

Summary of Contents for JMA-3400 Series

Reviews:

JRC JMA-3400 Series, Instruction Manual, Page: 137 / 314

Search results

Summary of Contents for JMA-3400 Series

Reviews: