JRC JMA-3400 Series Instruction Manual Download Page 170

Page: 170 / 314

Chapter 5 VARIOUS FUNCTIONS

122

Procedure for modifying a line vertex

1. Press the cross key (up/down) or turn the MULTI control, move the focus on the vertex to be modified.

2. Press the SEA control.

3. The dialog as below is displayed.

4. Input the No.2 to No.5 items.

5. Select No.6 “Enter”, the vertex can be modified.

The lines can be deleted by operating on the list.

Procedure for individual deletion

1. Press the cross key (up/down) or turn the MULTI control to move the focus.

2. Press the RAIN control.

3. The selected line vertex is deleted.

All the lines can be deleted at once.

Procedure for deleting all

1. Press the BRILL control.

2. The following delete confirmation is displayed.

Select YES to delete.

3. All the lines are deleted.

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Search results

Summary of Contents for JMA-3400 Series

Reviews:

JRC JMA-3400 Series, Instruction Manual, Page: 170 / 314

Search results

Summary of Contents for JMA-3400 Series

Reviews: