manualshive.com logo in svg

JRC JMA-3400 Series, Instruction Manual, Page: 169 / 314

Share
Download
JRC JMA-3400 Series Instruction Manual Download Page 169

 

 

Chapter 5    VARIOUS FUNCTIONS 

121 

5.31.4  DISPLAY LINE TYPE 

Display the lines with the specified type. 

When “All” is set to All, the setting of “All” is prior to individual settings. 

When “All” is set to Individual, individual settings are prior to the setting of “All.” 

 

5.31.5  LINE LIST 

Display the list of lines which are on the radar screen. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ڦ

The line vertex can be created or modified by operating on the list. 

Procedure for creating new line vertex

 

1.  Press the GAIN control. 

2.  The dialog as below is displayed. 

 

 

 

 

 

 

3.  Input the No.2 to No.5 items. 

4.  Select No.6 “Enter”, the vertex can be created. 

 

 

 

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Reviews:

No comments