manualshive.com logo in svg

JRC JMA-3400 Series, Instruction Manual, Page: 163 / 314

Share
Download
JRC JMA-3400 Series Instruction Manual Download Page 163

 

 

Chapter 5    VARIOUS FUNCTIONS 

115 

5.29.3  MARK TYPE 

Select the type of mark. 

The type of mark can be selected from 

™

, 

㸩

, Y or      . 

 

5.29.4    DISPLAY MARK COLOR 

Display the marks with the specified color. 

When “All” is set to All, the setting of “All” is prior to individual settings. 

When “All” is set to Individual, individual settings are prior to the setting of “All.” 

 

5.29.5    DISPLAY MARK TYPE 

Display the marks with the specified type. 

When “All” is set to All, the setting of “All” is prior to individual settings. 

When “All” is set to Individual, individual settings are prior to the setting of “All.” 

 

5.29.6  MARK LIST 

Display the list of marks which are on the radar screen. 

 

 

 

 

 

 

 

 

 

 

 

 

 

ڦ

The mark can be created or modified by operating on the list. 

Procedure for creating new mark

 

1.  Press the GAIN control. 

2.  The dialog as below is displayed. 

 

 

 

 

 

 

3.  Input the No.2 to No.5 items. 

4.  Select No.6 “Enter”, the mark can be created. 

 

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Reviews:

No comments