manualshive.com logo in svg

JRC JMA-3400 Series, Instruction Manual, Page: 221 / 314

Share
Download
JRC JMA-3400 Series Instruction Manual Download Page 221

 

 

Chapter 8    DETAIL PERFORMANCE 

173 

8.8.1  MASTER/SLAVE/DEMO 

 
Master: Set to this item when connecting to scanner. 

Slave: Set to this item when input video signal of external source to display echo without scanner. 

 Demo: Set to this item when no video signal is input from external source and no scanner is connected. 
 

8.8.2  OWN OUTLINE 

 
Select the own ship outline display on/off. 
You can set the outline of the own ship in meters. In order to reduce the distance measurement error due to 
radar, please also set the installation position of the scanner. 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.8.3  BARGE OUTLINE 

 

Select the own ship outline display on/off. 

You can set the outline and position of the barge ship in meters.   

 

8.8.4  BEARING MARKER 

 

Set the bearing marker to display rotated image along the bearing signal. 

Select 

"

Rotate Step

"

 and set the unit of angle for rotating the marker. 

This function only works in Head Up (H-UP) mode. 

 

8.8.5    OPERATION NUMERIC DISPLAY 

 

Turn on/off the numeric display. 

If this function is turned on, numeric information is displayed when following operation performed. 

 

EBL/VRM/Parallel Cursor/Gain/Sea/Rain/Brill/PRF fine tuning 

Numeric display is disappeared after the operation. 

 

 

Select each setting item. 

Press the cross key or turn the 

MULTI

 control to set the value. 

* The same operation can be used to enter   

2. Full Width ~ 6.Scanner (side).     

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Reviews:

No comments