JRC JMA-3400 Series Instruction Manual Download Page 136

Page: 136 / 314

Chapter 5 VARIOUS FUNCTIONS

5.17 TUNE

Automatic tuning mode (AUTO) and manual tuning mode (MANUAL) are provide. In the automatic tuning

mode, transmission and receiving frequencies are tuned and adjusted automatically. In the manual tuning

mode, tuning is carried out by yourself.

When “AUTO” is selected, the equipment automatically adjust tuning. Tuning is adjusted when the range is

changed or pulse width is changed.

When “MANUAL” is selected, adjust the video to be the largest by observing the tune indicator bar. Because

the tune indicator bar is the guide during manual tuning, adjust the tune indicator bar to the maximum.

䐟

䐠

䐡

Manual Selected

Press the MENU button.

Select “Tune.”

Auto Selected

䐢

Use the cross key or

the MULTI control to

adjust the tuning bar.

Select “Manual” or “Auto.”

㼀㼡㼚㼑㻌㼕㼟㻌㼍㼡㼠㼛㼙㼍㼠㼕㼏㻚㻌

㻻㼚㼘㼥㻌㼏㼛㼚㼒㼕㼞㼙㼍㼠㼕㼛㼚㻌㼠㼛㻌㼎㼑㻌㻭㼡㼠㼛㻚

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Search results

Summary of Contents for JMA-3400 Series

Reviews:

JRC JMA-3400 Series, Instruction Manual, Page: 136 / 314

Search results

Summary of Contents for JMA-3400 Series

Reviews: