JRC JMA-3400 Series Instruction Manual Download

Page: 122 / 314

Chapter 5 VARIOUS FUNCTIONS

5.10 LINE FUNCTION

Lines can be indicated at any positions on the screen.

A line created on the screen holds the latitude and longitude.

Make Line

Press

Long press

Turn

Long press MULTI at the last point.

The start point is set.

The cursor shape is changes.

The cursor shape changes.

Operation of the MULTI control:

Turn left: moves the cursor to left.

Turn right: moves the cursor to right.

Turn left while pressing: moves the cursor down.

Turn right while pressing: moves the cursor up.

Place the middle point.

A line can be drawn with the placed

point as the starting point again.

Cross Key

Hint: Placing the middle point or last point can controlling

by Cross courser key and “ENT” key.

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Search results

Summary of Contents for JMA-3400 Series

Reviews:

Related manuals for JMA-3400 Series

Brands by name

Popular brands

JRC JMA-3400 Series, Instruction Manual

Search results

Summary of Contents for JMA-3400 Series

Reviews:

Related manuals for JMA-3400 Series

Brands by name

Popular brands