JRC JMA-3400 Series Instruction Manual Download Page 117

Page: 117 / 314

Chapter 5 VARIOUS FUNCTIONS

Cancel the all acquisition TT

Reference:

Manual acquisition

The target can be acquired manually by following procedures.

1. Move the cross cursor to location where want to acquire with the MULTI control or the cross key.

2. Press the ENT button.

3. Wait about one minute.

Cancel the acquired target

The target can be canceled manually by following procedures.

1. Move the cross cursor to target where want to cancel with the MULTI control or the cross key.

2. Press the CLR button.

Press

Turn

Select "Delete all" and press the MULTI
control to clear all tracking target.

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Search results

Summary of Contents for JMA-3400 Series

Reviews:

JRC JMA-3400 Series, Instruction Manual, Page: 117 / 314

Search results

Summary of Contents for JMA-3400 Series

Reviews: