manualshive.com logo in svg

JRC JMA-3400 Series, Instruction Manual, Page: 176 / 314

Share
Download
JRC JMA-3400 Series Instruction Manual Download Page 176

 

 

Chapter 5    VARIOUS FUNCTIONS 

128 

5.35  TIMED TX 

This function reduces power consumption. When using timed TX function, the operation state is repeatedly 

changed between TX and standby state. 

During the “Standby Time” state, non-transmission is performed and the antenna rotation stops. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.35.1  TIMED TX 

 

Turn on/off the timed TX function. 

The timed TX function can be turned off only in TX state. It cannot be turned off in standby state. 

 

5.35.2  TX TIME 

 

Set the number of antenna rotation. Use the cross key or the MULTI control to change the value. 

TX time can be adjusted between 1 and 99 Scan. 

 

 

ձ

  Press the MENU button. 

ղ

  Select “Timed TX”. 

ճ

Select each menu. 

Timed TX 

TX Time 

Standby Time 

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Reviews:

No comments