manualshive.com logo in svg

JRC JMA-3400 Series, Instruction Manual, Page: 156 / 314

Share
Download
JRC JMA-3400 Series Instruction Manual Download Page 156

 

 

Chapter 5    VARIOUS FUNCTIONS 

108 

5.25  GUARD ZONE 

This function sounds an alarm by detecting the movement of the target in the created zone.   

Two fan-shaped zones can be created. Zone alarm level and mode can be set for each zone.   

The automatic acquisition function (Auto TT) can be set to the zone. 

Note: 

The guard zone for which the Auto TT function can be set is only zone 1. An alarm function other than the 

Auto TT function can be set in zone 2. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each Zone 2 setting menu is the same as Zone 1. 

Zone Mode 

䐡

  Select each menu.

㻌

Zone Alarm Level 

䐟

  Press the MENU button.

㻌

䐠

 Select 

“Guard 

Zone.”

㻌

Summary of Contents for JMA-3400 Series



























































































































































































































































































































Reviews:

No comments