Ikegami OCP-300, Operation Manual

Page: 144 / 274

11-2 11. Setting the Panel Assignment and Program Number
3. Press [Assign] switch from the LCD screen.
4.
Press [OCP-300] switch from the LCD screen.
5.
ARC ID of this control panel can be set in [OCP-300] screen. If you press [ARC
ID(HEX)] switch in the LCD screen and operate the rotary encoder 4, you can operate
the displayed ARC network ID. The ARC network ID can be set to a value between 01h
and FFh (1 to 255 in case of decimal value). If [Enter] switch is pressed in the LCD
screen after the setting has been complete, the ARC network ID will be confirmed. If
[Cancel] switch is pressed while setting the ID, the operation will be canceled.