Ikegami OCP-300, Operation Manual

Page: 172 / 274

13-7 13. Standard Function
If the item is selected, [Engineer] and [Factory] switches will appear on the bottom
of the screen. There you can select whether to load the engineering data or to load
the factory data. If either of switches is pressed, [Execute] switch will be displayed
on the bottom of the LCD screen. If there is no function, the switch is displayed in
gray (dark) and cannot be selected.
2. If [Execute] switch is pressed, a pop-up screen will appear on the LCD screen to call
your attention. If “No” is selected, it will return to the previous screen without
execution.
5HFDOO3UHVHW)LOH
+HDG)DFWRU\'DWD
&RQWLQXH"
3. If “Yes” is selected, the execution will be started.
3OHDVHZDLW
/RDGLQJ
As a pop-up screen will be displayed until the process is complete, you can check if
it is executing or not.
4. The camera head and BS/CCU may not be able to execute for some reason. In this
case, a pop-up screen will appear on the LCD screen to call your attention. Once
you confirmed, press "OK".