Ikegami OCP-300, Operation Manual

Page: 27 / 274

2. The Name and Function of Each Part 2-7
2.3 Selection Function Control Unit
ձ
SELECT switch, PAGE switch
Selects each mode with the switch.
࣭
ND : Change of ND filter position
࣭
CC : Change of CC filter position
࣭
Gain : Change of Step GAIN of the camera head
Usually, set it to "0 dB."
࣭
EFF : Change of the EFFECT filter position
࣭
Gamm : Change of the GAMMA STEP of the camera head
Usually, set it to "0.45."
࣭
Bkst : Change of the black stretch/pressing action
࣭
Black stretch: +3, +5, +7, +9, +11%
࣭
Black press: -3, -5, -7, -9, -11%
The range which can be set up changes with the camera to connect.
Usually, set it to "OFF."
࣭
AWB : Change of the AWB memory (Ach/Bch/OFF)
(When H is shown on the head, it is a setup of the camera head)
When the number of optical filter turrets is one, it is displayed as "Fltr."
Since ND, CC and EFF have an option on the camera head side when the switch
has gone out, selection from OCP cannot be performed. When the camera head has an
option
or if the switch is pushed, the option can be moved to the OCP side from
the camera head side.
䐟
䐠
䐡