Ikegami OCP-300, Operation Manual

Page: 166 / 274

13-1 13. Standard Function
13. Standard Function
13.1 Function Overview
Standard function is used to reset the BS/CCU setting to the standard setting by
controlling the control panel. OCP-300 has two main standard functions, “Clear to
Standard” and “Recall Preset File".
“Clear to Standard” can be executed by individually sending a conventional command.
“Recall Preset File” can be executed by sending a new specialized command.
1) Clear to Standard
Clear to Standard can reset the camera to the standard setting by sending an individual
command from OCP-300. Therefore, the items that can be reset to the standard setting
are the items that can be operated by a normal panel operation.
If a special function is turned on, it will be formed to be turned off. The control data can
be also cleared by individually sending a manual clear command. Therefore, the control
data after the execution will be returned to the state at the end of auto-setup and also
the state being manually set.
Clear to Standard has 2 modes, Basic and Complete.
࣭
Basic mode
Basic mode resets the item for the picture making to a standard setting.
࣭
Complete mode
Complete mode resets the items related to the system up to the phase adjustment,
etc., in addition to the Basic item, to a standard setting.
The standard function can be operated even in the camera head and BS/CCU that do
not have the Preset File function, by individually sending this command.
Each item of the standard setting can be arbitrarily changed in Clear to Standard.
Reference
: Please refer to "20.4 STD FUNCTION" for the detail information on how to
change the standard setting.