Ikegami OCP-300, Operation Manual

Page: 270 / 274

24-8 24. Updating the Firmware
+'.(;5')
&RPSOHWH
Upon completion of the update, check the completion status with the VF and PM
images of the updated device and the indicator on the front side of the device in
addition to the panel indication. After checking, return the menu setting and the
internal switch setting to the previous state.
Caution
The update process of the software varies depending on the device to be
updated. Therefore, there are cases that the completion status is not
displayed and the execution indication disappears.
Note
: If you try to invoke the data other than the RDF file, the following warning
appears.
In that case, invoking the data is not possible. Press "OK".
>(5525@
127352*5$0),/(
Caution
Upon completion of the update, check the completion status with the VF and
PM images of the updated device and the indicator on the front side of the
device in addition to the LCD screen indication.