Ikegami OCP-300, Operation Manual

Page: 199 / 274

17. Setting Procedure of Control Panel 17-5
6. If the [Execute] switch displayed on the bottom right of the LCD screen is pressed, the
confirmation window will appear. Then, press [Yes] to load the User File and restart the
control panel. If [NO] is pressed, the Window will disappear.
7.
If loading the Factory File, set the [Factory File] switch to ON, and follow the steps 4
and 5. As the Factory File cannot be saved, the [Save] switch will not be displayed.
8. If executing the RAM Clear, set the [RAM Clear] switch to ON, and press the [Execute]
switch. After the confirmation window is displayed, press [Yes] to initialize and restart
the control panel setting. If [NO] is pressed, the Window will disappear.