Ikegami OCP-300, Operation Manual

Page: 212 / 274

20-8 20. Option function
Press the number of camera to be selected from either one of switches 1 through 10 located
on [Master] of the window. Assignment of camera with respective number is selected in the
Assign screen. The number of the camera is displayed on the top right corner of the Assign
screen, which can be switched by switch to assign respective numbers.
Reference
: Please refer to "11. Setting of Panel Assignment and Program Number" for
assignment of network.
20.2.2 External Camera Selection
You can input a signal for external camera selection from the EXIT-1 connector.
Reference
: Please refer to "23.2 Pin Function of External Connector" for specification
of EXT-1.
The [EXT Sel] switch on the [Select] window is enabled when the external
selection enable is set to ON.
The external camera selection is enabled when the [EXT Sel] switch is set
to ON, which prohibits selection of camera from the LCD screen, changing
the Assign, and operation of the Enable switch.
Setting the external camera selection to OFF turns OFF the [EXT Sel]
switch, which enables selection of camera from the LCD screen.
20.2.3 Prohibition Mode
Press and hold the [INH MODE] switch until color of the switch change to yellow
activates the prohibition mode.
Pressing either one of switches 1 through 10 in the [Master] during the prohibition mode
switches status of enabling or disabling selection of the number. Color of the switch of
disabled number is changed to black and can not be selected. Pressing the [INH MODE]
switch again release the prohibition switch select mode.