Ikegami OCP-300, Operation Manual

Page: 83 / 274

4. LCD Menu 4 -33
13) WFM/PM (Setup 1/2)
If WFM/PM is pressed, the signal of the camera head, the WFM ( Waveform Monitor )
output of BS/CCU and PM output can be selected.
"R", "G", "B", "Y", "ENC" and "-G" can be outputted to the WFM output and PM output
(however, there are also devices which do not correspond to -G). When "SEQ" is selected,
3 waves of R, G and B are outputted as the WFM output. PM output holds the output
before selecting. To display 3 waves on the waveform monitor, it is necessary to connect
the WFM REMOTE connector and waveform monitor of BS/CCU by a WFM remote
cable.
When Super/Mix is "ON", the selected signal is outputted to PM and WFM. Moreover, if
"OFF", only the signal of one channel is outputted to PM and WFM by latter pressing
priority. However, this switch operates only when it is connected with BS/CCU. It
becomes "off" if the camera is not connected to BS/CCU (at the time of self-contain
operation).