Ikegami OCP-300, Operation Manual

Page: 161 / 274

12. Operation Range Setting Function 12-4
12.3 How to Change the Password
If [Change PASSWORD] switch in the CONTROL DEPTH screen is pressed, the
following screen will be displayed.
㻌
Enter the old 4-digit password ([0] [0] [0] [0] for the factory default setting). Once the
password is confirmed, you can enter a new password.
Re-enter the new password to confirm. If it is confirmed, the setting will be completed.
Then, the screen will return to the CONTROL DEPTH screen.
If the password is not correct, the input field will be cleared.
Press ___ to return to the CONTROL DEPTH screen without entering a password.
Caution
Please note that it is prohibited to accept the switches related to LCD
screen switching except when this screen is displayed.
Note
: If you forget the password or you urgently need to unlock the restriction on
the operation when the person who set the password is absent, the control
panel can be reset to the initial setting.
Reference
: Please refer to "22.3 Initial Setting" for resetting to the initial setting.
㻌