Ikegami OCP-300, Operation Manual

Page: 124 / 274

9-7 9. How to Use the Memory Card
9.5 Invoking the File Data from the Memory Card
1. Insert the memory card to the memory card slot.
2. Press the [SETUP] switch from the FUNCTION switches on the top of the LCD
screen. Press the [Memory Card] switch at the item selecting switch section on the
LCD screen page 2/2.
3. Select the switch according to the file data type to be invoked.
࣭
Press the [All Files] switch in case of the all data file.
࣭
Press the [Lens File] switch in case of the lens file.
࣭
Press the [Snapshot File] switch in case of the snapshot file.
࣭
Press the [Scene File] switch in case of the scene files.
࣭
Press the [REF File] switch in case of the reference level file.
࣭
Use the [RDF File] switch when updating the firmware of the connected device.
Reference
: Refer to "24.2 Updating the Firmware of the Connected Device" for details
of the operation.
4. Turn on the [Load] switch.
5. Turn the file search control knob to select the desired file. Or input the file name by
using the switch, cursor control, and the character select control on the LCD
screen.
Note
: Selecting a desired file is possible by using the search function. For example,
input "AB" to the file name and rotate the file search control. The search
function automatically starts and searches the files that start with "AB." This
search function is also available for the extension.
$%&'()*+$//
䝣䜯䜲䝹᳨⣴䝁䞁䝖䝻䞊䝹
$%&'()*+$//
File search control;