Ikegami OCP-300, Operation Manual

Page: 240 / 274

21-26 21. Panel configuration (Panel setting)
21.3. Control Depth
You can change range of control for each item by using Control Depth.
Items that can be changed are listed in "12.4 Detail of initial operation range".
Reference
: Please refer to "12 Operation range setting function" for the Control Depth
21.3.1 Method to change operation range
1. Press [Enter] after operating " ń " with the rotary encoder 1 in Panel Config screen
to align it to [Control Depth].
2. When a screen to change operation range is displayed, press [Enter] after operating
"
ń " with the rotary encoder 1 to align it to the item to change its operation range.
Page can be switched by the switch located at top right corner of the
screen.
3. Selected item blinks. You can confirm it by pressing [Edit] after selecting operation
range by operating "
ń " with the rotary encoder 1. The change is canceled by
pressing [Cancel] switch.
z
BASIC
㸸
Operation is permitted by [Control Depth] with authorization level of
[Basic] or higher