Ikegami OCP-300, Operation Manual

Page: 99 / 274

5. Operation of the Control Knob 5-7
With this function, you can switch the connection of the control panel or assign the
setting without worrying about the control knob positions. Thus, an adjustment after
the connection becomes unnecessary. (However, the iris may move depending on the
setting.)
In addition, this function is valid for reading of scene files. The camera data does not
jump after reading of the file. Therefore, starting the operation from the current control
knob position becomes possible. You can read the scene file after setting the control
knob to the center position by using the knob free function that is described in the
following section.
Reference
: Refer to "5.4 Knob Free Function" for the detailed operations.
Refer to "6. Absolute Value Iris Control" and "7. Relative Value Iris
Control" for details of the iris operation.