Ikegami OCP-300, Operation Manual

Page: 159 / 274

12. Operation Range Setting Function 12-2
3. [Complete] switch is selected as the factory default setting, and there is no
restriction on the operation.
Press to return to the OCP SET screen.
4. Press [Basic], [Standard], [Extended], or [Complete] switch to change the operation
range. The following password input screen will be displayed.
㻌
5. Enter the 4-digit password. Once the password is confirmed, the operation range
can be set to the selected range.
If the password is not correct, the input field will be cleared.
Press
Close switch to close the password input screen.
The screen will return to the operation range as before the selection.
* The factory default password is set to [0] [0] [0] [0].
Please note that it is prohibited to accept the switches related to LCD screen
switching except when this screen is displayed.
The prohibited functions are marked with key icons. If these functions are pressed,
the buzzer will sound and the operation will not be accepted. This is same for the
prohibited hard switches. If they are pressed, the buzzer will sound and the operation
will not be accepted.