Ikegami OCP-300, Operation Manual

Page: 7 / 274

INFORMATION TO THE USER iii
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class A digital device, against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The mark means that the following products will meet the Directives 2004/108/EC and standards
EN55103-1, EN55103-2 (for the Electromagnetic environment E4-E5).
Use shielded cable except AC cable.
This equipment doesn’t intend to use at residential areas, so that use in residential areas may cause
interference.
The Ethernet cable, please use a shielded cable always.
Please attach a core to a cable to connect to a connector of command, EXT-1 and EXT-2 by all means.
Please make an inquiry to us about the installation of the core, if necessary.