Ikegami OCP-300, Operation Manual

Page: 152 / 274

11-10 11. Setting the Panel Assignment and Program Number
In the SELF mode, if the Assign setting is changed, the program number of the camera
number indicator in the control panel will be changed to the stored number, and the
program number will be sent to the camera head by a command.
ARC ID PGM.No
1 2
2 4
3 3
4 5
1. Changing the connected BS/CCU
Ex.): ARC ID 1 ń 4
IP ADDRESS 192.168.1.100
ń 192.168.1.102
2. Changing
the
connection
Program number
No function
3. Camera number indicator
(Program number display)
4. Changing the display of
program number
5. Sending the
program number
6. Changing the
display of
program number
Storing the program number
by CCU number