Ikegami OCP-300, Operation Manual

Page: 206 / 274

20-2 20. Option function
2. Set assignment for which camera is to be assigned for Lch camera and Rch camera.
Switching over of Lch and Rch to be set is selected by switch on the top
right corner of screen
Reference
: Please refer to "11. Setting of Panel Assignment and Program Number" for
detail setting method.
20.1.3 Switching Lch/Rch/Operation Control
Individual control of Lch/Rch cameras for maintenance purpose and simultaneous
control for operation purpose are available by selecting ether one of these two modes.
Configuration of the select function control section is changed at the 3D control mode to
enable the left side select switch to function as the 3D camera select switch. Selection
can be switched between Lch/Rch /Operation by operating the up/down switch ( ).
Switching Lch or Rch
Select function control section
Camera control
Indication
Changes when operating switches
Lighting of switch