Ikegami OCP-300, Operation Manual

Page: 197 / 274

17. Setting Procedure of Control Panel 17-3
17.2 Setting Procedure at the Control Panel
1. To use a memory card for saving or loading data, press the OCP SET switch from the
FUNCTION switches on the top of the LCD screen, and then press the [Preset File]
switch in the item selection switch section.
2.
The following methods can be selected to save or load the panel data:
࣭
User File
Data for the panel configuration and user screen setting.
It can be saved and loaded.
࣭
Factory File
Data for the panel configuration and user screen setting at the factory.
It is read-only.
࣭
RAM Clear
If this is executed, all statuses of the control panel will be reset to the initial setting.
Use this when there is an abnormality found on the device.