Ikegami OCP-300, Operation Manual

Page: 40 / 274

2-20 2. The Name and Function of Each Part
2.8 Connector Panel
ձ
The connector for LAN
Connects BS/CCU corresponding to Ethernet with a LAN cable.
ղ
ICCP/ARC NET/Ethernet changeover switch
Changes ground command connection, ARC Internet connection and Ethernet
connection.
ICCP : at the time of ground command (serial command) connection
ARC NET : at the time of ARC network connection
Ethernet
: at the time of Ethernet connection
ճ
EXT-1 connector
It is a connector for extension.
There is a function of the output of the camera status, the input of the camera status
and the input of camera selection enabling.
Reference
: Refer to "23.2 The Pin Function of the External Connector" for the pin
function.
մ
EXT-2 (PREVIEW) connector
It is a connector for extension.
When the PREVIEW switch is pushed, PV (-) short-circuits with COM.
When the PREVIEW switch is not pushed, PV (+) short-circuits with COM.
Moreover, there is a function of the input/output of a tarry signal and a program
number output.
ղ
ձ
ճ
մ
յ