Ikegami OCP-300, Operation Manual

Page: 175 / 274

14. Character Setting 14-2
14.1 Setting the Camera Menu
Next knob
Select knob
Enter switch
OCP-300
1. Press and hold Menu switch. Main menu
will be displayed. When the BS/CCU is
connected, the menu operation can be
performed for the function setting of
BS/CCU. When the camera head is
connected, the menu operation can be
performed for the camera head.
2. Turn Select knob or Next knob to move the
flashing cursor over to the target item, and
then press Enter switch. Sub-menu will be
displayed.
Setting items
Mode setting
3. Turn Select knob or Next knob to move the flashing cursor over to the target setting
item, and then press Enter switch. The flashing cursor shifts to the mode setting.
4. Turn Select knob or Next knob to change the mode. Depending on the function,
some items can change the settings when the knob is turned while other items can
change the settings when the Enter switch is pressed.
5.
It quits when all settings are changed.
To quit,
࣭
Select QUIT on the PM screen by operating the menu.
࣭
Press Quit switch on the LCD screen.
࣭
Press FUNCTION switch on the top of the LCD screen.
The above procedures can be used to quit.
Note
:
The menu may not appear unless it is set to BARS ON depending on the model
of camera head and BS/CCU.