Ikegami OCP-300, Operation Manual

Page: 23 / 274

2. The Name and Function of Each Part 2-3
ճ
Memory card slot
It is a slot for the memory card (SD card) which performs save and call of the camera
head and the data of BS/CCU.
When you use the memory card, please insert the card into the slot calmly until it will
be locked and not returned. Moreover, when you take out the card, please push the
upper part of the inserted card in calmly. Then, the card can be lifted and pulled out.
When you do not use the memory card, please attach the cover for protection against
dust.
The access indicator beside the slot lights up during write and read operation. Please do
not pull out the card, when the access indicator is on. Not only destruction of the data in
the card is caused but the camera head and the data of BS/CCU may be destroyed.
մ PM IND/PAGE switch
Indicates the variety of information by characters at PM output of BS/CCU.
Whenever the switch is pushed, it displays as follows.
Display OFF
Page 0 .......... Camera ID display screen
Page 1 .......... Self-test information (diagnosis) display screen
Page 2 .......... Auto-setup monitor execution display screen
Page 3 .......... Standby (reserve) screen
(SCENE FILE NAME etc.)
յ
ENABLE switch
Enables operation of OCP.
When the switch is on, the control from OCP becomes possible.