Ikegami OCP-300, Operation Manual

Page: 38 / 274

2-18 2. The Name and Function of Each Part
clause
ո
M.PED control knob of "2.6 Iris/pedestal control section (JOYSTICK TYPE)",
clause
յ
IRIS SENSE control knob at the time of relative-value control and clause
ո
IRIS control knob are set FREE and the knob is turned, the control can be held.
For example, in the case where AWB and AUTO SETUP are performed when the R/G/B
GAIN knob is not in the center position, or when ABB or AUTO SETUP are performed
when the R/G/BPED and M.PED knobs are not in the center positions and each knob
becomes effective on one side, being effective of the amount of control on one side will be
canceled if the knob is returned to the center position by pushing this switch.
Reference
: Please refer to "5.4 Knob Free Function" for detailed operation.
մ EXT indicator
When the optical extender of the camera head is "ON", the indicator of LENS lights up,
and when the digital extender of the camera head is "ON", the indicator of DGTL lights
up.
յ HEAD PWR/CABLE indicator
When the power supply of the camera head is "ON", the indicator of HEAD PWR lights
up.
When BS/CCU is normally connected with the camera head by the TRIAX cable or the
optical cable, CABLE lights up in green. Moreover, when BS/CCU is not connected with
the camera head or not normally connected due to the cable short-circuit etc., the light
is switched on in red.