Ikegami OCP-300, Operation Manual

Page: 235 / 274

21. Panel configuration (Panel setting) 21-21
21.2.2.2 Direct menu jump
DJMP in assigning item of FUNCTION SW is a function to enable displaying user set
menu screen by pressing an assigned switch. It can save 4 menu screens of [DJMP1],
[DJMP2], [DJMP3] and [DJMP4].
The menu screen can be saved by pressing a FUNCTION switch to which DJMP
function is assigned while [STORE] switch of OCP-300 main unit is turned ON. OK
sound beeps when it is saved and the memorized menu screen can be opened by pressing
the FUNCTION switch. Attempting to save the menu screen in a screen in which saving
is disabled such as [Panel Config] may cause beeping NG sound and it can not be saved.
21.2.3. FUNCTION VR
OCP-300 is capable of assigning user setting function to each of two FUCNTION
volumes. Each function can be assigned to main unit volume F.VR1 or F.VR2.