Ikegami OCP-300, Operation Manual

Page: 205 / 274

20. Option function 20-1
20. Optional Function
Paid optional functions are available for the OCP-300. The optional functions are enabled by
loading the KEY File.
Reference
: Please refer to the "17. Setting Procedure of Control Panel" for how to load
the KEY File.
20.1. 3D Camera Control
Individual control of Lch/Rch cameras for maintenance purpose and simultaneous
control for operation purpose are available by using the OCP-300 when 2 cameras are
configured as a 3D camera. Paid 3D KEY file needs to be loaded in order to enable the
3D camera control.
Caution
The 3D camera control is available only during operation in ARC network or
Ethernet network.
20.1.1 Setting for 3D Control Mode
Panel configuration has to be set for the 3D camera control.
The 3D control becomes available by setting the [OCP Mode] setting on Control in the
panel configuration to [3D].
Reference
: Please refer to "21.1.3 Setting item" for detail setting method.
20.1.2 Lch Camera/Rch Camera Assignment Initial Setting
It is necessary to select the camera for Lch or for Rch from multiple cameras connected
in network for the 3D camera control.
1. Press MAINTE switch from FUNCTION switches on the top of LCD screen and
[ASSIGN] switch for the LCD screen.