Ikegami OCP-300, Operation Manual

Page: 200 / 274

18-1 18. IRIS position adjustment function
18. IRIS position adjustment function
The lens iris of the camera head may not fit in the OPEN/CLOSE end even if the lens
iris of the control panel shows the OPEN/CLOSE end with full range.
OCP-300 has a function that makes the OPEN/CLOSE end position of lens iris
recognized and fills the difference with the lens iris value of the camera head by
operating the LCD screen.
Caution
Before using this function, please check if the F value of the iris is not
deviated on the camera side using the LENS ADJUST function of the
camera head. The position of OPEN/CLOSE end has been adjusted at the
factory.
Reference
: Please refer to the operation manual of the connected camera head for the
LENS ADJUST function. Some cameras may not have the LENS ADJUST
function.
18.1. Adjustment procedure
1. Press [OCP SET] switch from FUNCTION switches on the top of LCD screen and select
[INITIAL SETUP]. The menu for panel settings will be displayed.