Ikegami OCP-300, Operation Manual

Page: 204 / 274

19-2 19. Parallel Connection
19.2 Warning for ARC Network
You can connect the multiple OCPs to the BS/CCU for ARC network. Connecting the
OCP to the BS/CCU which is operated under other OCP nay cause trouble when it is
operated.
Connecting the BS/CCU to the OCP to which any other BS/CCU has been connected
may cause warning on LCD screen to confirm the connection, depending on setting of
configuration. Whether any other OCU is connected to the BS/CCU or not is confirmed
when the enable is turned ON, or the assignment setting is changed.
If the other OCP is connected, the following message appears on the LCD screen:
>:$51,1*@
2WKHU2&3LV&RQQHFWHG
Pressing [YES] makes connection and pressing [NO] turns the panel enable to OFF.
If connection is made from other panel to the network, the following message appears on
the LCD screen:
>:$51,1*@
1HZ2&3KDVEHHQFRQQHFWHG
E0h E1h
Caution
Operation is disabled if this message appears.
The warning may not appear when power supply is ON for connected
CPH-300, or when entire power supply is ON simultaneously by the
system.
Reference
: Please refer to "21.1.3 Setting Item" for setting method.