Ikegami OCP-300, Operation Manual

Page: 196 / 274

17-2 17. Setting Procedure of Control Panel
࣭
Standard Data
Data for the panel configuration [STD FUNCTION].
࣭
RAM Data
All data that is saved in the control panel.
࣭
Key Data
Optional function enabled data.
It is read-only.
As with camera data, individual data can be loaded from the data saved in ALL Data.
For example, only the data for User screen setting can be loaded from the data that is
saved in ALL Data.
When the data is loaded, it is checked if it is consistent with the saved version. It is
possible to load the data with a different version; however, the difference in function due
to the version, etc., will not be changed. If loading the data with a different version,
please check the panel configuration and User screen setting.
Loading data from the SD memory card is completed instantly due to the small data
size. The panel will be reset after loading the data.
Reference
: Please refer to "9. Procedure for using memory card" for the procedure of
using the memory card.
Please refer to "9. Procedure for using memory card" for more detail.
Note
: [KEY Code] switch is used to load the KEY Code file for the optional
setting and client specific setting. Please refer to the manual accompanied
with the KEY Code file for a detailed procedure for using a memory card.