IBM RS/6000 Enterprise Server M80, Service Manual

Page: 278 / 567

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
406D 3124 Attention handler detected RIO cable on port
3 fault
1. RIO cable on port 3
Location: U1.1-P1.1/Q4
2. CEC RIO bus adapter
Location: U1.1-P1.1
406D 3140 Attention handler detected RIO hub 0 fault CEC RIO bus adapter
Location: U1.1-P1.1
406D 3141 Attention handler detected RIO hub 1 fault CEC RIO bus adapter
Location: U1.1-P1.1
406D 31FF Attention handler detected RIO port fault CEC RIO bus adapter
Location: U1.1-P1.1
406D 3200 Attention handler detected primary I/O drawer
fault
Go to “MAP 1540: Minimum Configuration”
on page 110.
406D 3201 Attention handler detected primary I/O drawer
backplane fault
Primary I/O drawer backplane
Location: U0.1-P1
406D 3280 Attention handler detected primary RIO
adapter fault
Primary RIO adapter
Location: U0.1-P1.1
406D 3281 Attention handler detected primary RIO port 0
fault
1. Check RIO cable
Location: U0.1-P1.1/Q1
2. RIO bus adapter
Location: U0.1-P1.1
406D 3282 Attention handler detected primary RIO port 1
fault
1. Check RIO cable
Location: U0.1-P1.1/Q2
2. RIO bus adapter
Location: U0.1-P1.1
406D 3283 Attention handler detected primary RIO ports
fault
RIO bus adapter
Location: U0.1-P1.1
406D 3284 Attention handler detected PCI controller
PHB0
1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406D 3285 Attention handler detected PCI controller
PHB1
1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406D 3286 Attention handler detected PCI controller
PHB2
1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406E 0001 Scan control routines detected CEC
backplane failure
CEC backplane
Location: U1.1-P1
406E 0003 Scan control routines detected processor
fault
All processors
Location: U1.1-P1-C1
406E 0009 Scan control routines detected memory fault All memory
Location: U1.1-P1-M1 x2
406E 00A0 Scan control routines detected CSP service
processor firmware fault
Update system firmware
Location: U0.1-P1/Y1
406E 00A1 Scan control routines detected AIX or system
firmware fault
1. Check for AIX updates
2. Check for system firmware updates
Location: U0.1-P1/Y1
260
Service Guide