IBM RS/6000 Enterprise Server M80, Service Manual

Page: 272 / 567

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
406C 3282 IPL MOPS detected primary RIO port 1 fault 1. Check RIO cable
Location: U0.1-P1.1/Q2
2. RIO bus adapter
Location: U0.1-P1.1
406C 3283 IPL MOPS detected primary RIO ports fault RIO bus adapter
Location: U0.1-P1.1
406C 3284 IPL MOPS detected PCI controller PHB0 1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406C 3285 IPL MOPS detected PCI controller PHB1 1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406C 3286 IPL MOPS detected PCI controller PHB2 1. RIO bus adapter
Location: U0.1-P1.1
2. Primary I/O drawer backplane
Location: U0.1-P1
406D 0001 Attention handler detected CEC backplane
failure
CEC backplane
Location: U1.1-P1
406D 0003 Attention handler detected processor fault All processors
Location: U1.1-P1-C1
406D 0009 Attention handler detected memory fault All memory
Location: U1.1-P1-M1 x2
406D 00A0 Attention handler detected CSP service
processor firmware fault
Update system firmware
Location: U0.1-P1/Y1
406D 00A1 Attention handler detected AIX or system
firmware fault
1. Check for AIX updates
2. Check for system firmware updates
Location: U0.1-P1/Y1
406D 00A2 Attention handler detected service processor
firmware (processor runtime diagnostics) fault
Check for system firmware updates
Location: U0.1-P1/Y1
406D 00A3 Attention handler detected memory plugging
fault
All pluggable memory
406D 00A4 Attention handler detected application caused
fault
Application software
406D 00A5 Attention handler detected invalid system
configuration
Verify system components are supported and
properly installed.
406D 00A6 Attention handler detected no usable memory 1. Ensure that CEC memory is properly
installed.
2. If more than one DIMM is called out, go
to the service processor Memory
Configuration/Deconfiguration Menu to
verify memory DIMMs state. See
″
Memory Configuration/Deconfiguration
Menu
″
on page 374 for more information.
406D 00A7 Attention handler detected hardware problem Go to minimum configuration and also run
CEC minimum configuration
406D 00B0 Attention handler detected bus controller
lock-unlock failure
RIO bus adapter
Location: U0.1-P1.1
254
Service Guide