Hyundai Bi3 Owner'S Manual Download Page 252

Page: 252 / 444

7-5

IGNITION SWITCH

WARNING

To reduce the risk of SERIOUS

INJURY or DEATH, take the following

precautions:
• NEVER allow children or any person

who is unfamiliar with the vehicle to

touch the ignition switch or related

parts. Unexpected and sudden

vehicle movement can occur.

• NEVER reach through the steering

wheel for the ignition switch, or any

other control, while the vehicle is in

motion. The presence of your hand

or arm in this area may cause a loss

of vehicle control resulting in an

accident.

Key ignition switch

(if equipped)

OIB054010

WARNING

• NEVER turn the ignition switch to

the LOCK or ACC position while the

vehicle is in motion except in an

emergency. This will result in the

engine turning off and loss of power

assist for the steering and brake

systems.

This may lead to loss of directional

control and braking function, which

could cause an accident.

• Before leaving the driver’s seat,

always make sure the shift lever is

in 1st gear (for manual transmission

vehicle) or N (Neutral) position (for

Automated Manual Transmission

vehicle), apply the parking brake,

and turn ignition switch to the LOCK

position.

Unexpected vehicle movement may

occur if these precautions are not

followed.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands